Plug welded coupler plate structure with draining holes
Pyramid shaped dog house
Swivel points mounted outside of main beams
Fully welded panels and rails
Heavy duty aluminum panel designtiene menú contextual
Photos
Highlights
Auburn, Washington
2024
Manac
Dumps Agricultural Aluminum End Dump
Top Rail: Aluminum extrusion 6061-T6, 5 3/16" x 4 13/16" with integrated "U" shape, welded full length to side panels
Available
Coupler: 48"-50" | 60"-84" side wall
Specifications
2024
Manac
Dumps Agricultural
Aluminum End Dump
Dump
Gooseneck: 9" high with integrated nose ramp 46" straight behind king pin | Front Wall: 3/16" thick 5454-H32 aluminum plate with 13" radius each side
28'-45'
102"
97 7/8"
Coupler: 48"-50" | 60"-84" side wall
15"-36"
3/8" thick, plug welded structure
Top Rail: Aluminum extrusion 6061-T6, 5 3/16" x 4 13/16" with integrated "U" shape, welded full length to side panels
Aluminum frame full length, aluminum extrusion 6061-T6 polished, 5/16" thick web 17" high and 5 1/2" x 1 1/8" flanges
Coupling: Male, 1" diameter, screw type
Hyva, Alpha Series (FEE 9-5-336), 9" diameter, 5 sections, 336" stroke with manual greasing system
Main System: Grote Ultra Blue LED sealed lights & wiring harness system meets Transport Canada and DOT requirements | Front Plug: 7 way (SAE J560) with easy access wiring | Front Additional Plug: 7 way (ISO 3731) for ABS
LED shock proof lights with polycarbonate lenses
Hendrickson Intraax air ride, others available | Bogie: Fixed | ABS System: Wabco ABS 2S-1M
Bumper: 3/16" thick aluminum plate welded at frame and pull plates bolted under the beams | Door Frame: Aluminum extrusion (6005-T6) with a 6 degree incline | | Door: Locks Air operated, two locking hooks per side | Compression Locks: 4 total, 1 each side at bottom of rear door on frame uprights and 2 on bottom of door each corner | Landing Gear: Holland Mark V | Air Controls: Double, air ride suspension and door lock cylinder operate together with electric control and individually with manual control | Gladhands: Fixed at front | Paint: Landing gear and steel frame option are shot blasted, one coat of epoxy primer and two acrylic polyurethane top coats | Decals: Conspicuity tape meets CMVSS & DOT standards | Ladders: 4 total, aluminum cast steps on exterior front wall road side and exterior side wall at rear, "L" shape bar on the interior front wall and interior side wall at rear | Anit-Roll Bar: Aluminum full length between main beams
Doors: Dump, made of smoothside heavy-duty panels 6005-T6, 1 3/4" thick x 15 5/16" wide
Side Panels: Smoothside heavy-duty polished aluminum panels, 1 3/4" thick x 15 5/16" wide. Inside wall panels welded full height | Bottom Rail: Aluminum extrusion 6061-T6, 5" x 3 3/4", welded full length to side panels | Rear Posts: Aluminum extrusion polished 6061-T6, 2 11/16" x 10" with reinforcement
